MTC 3675 Brake Pad Wear Sensor Wire 084-1528

( Brand: Mtc ), ( Placement On Vehicle: Wheels ), ( Manufacturer Part Number: 3675 ), ( Ipn: 084-1528 Ws379 Pws179 ), ( Warranty: 1 Year ), ( Type: Brake Pad Wear Sensor ), ( Features: Direct Fit ), ( Caution: Fitment Is For North America Vehicles ), ( Position: Front ), ( Country Of Origin: Primary ), ( Terminal Quantity: Factory Quantity ), ( Terminal Type: Factory Connector ), ( Material: Factory Specifications ), ( Fitment Type: Direct Replacement ), ( Modified Item: No ), ( Oe/oem Part Number: 210-540-11-17 )

Review MTC Brake Pad Wear Sensor Factory Quantity Wire Direct Fit

The MTC 3675 brake pad wear sensor wire is an essential component of a brake system designed to provide early warning signs of brake pad wear. This sensor wire is specifically suited for vehicles equipped with the MTC 3675 brake pad wear sensor system.

Each MTC 3675 brake pad wear sensor wire is meticulously manufactured to meet the highest standards of quality and durability. The wire itself is made from a high-temperature resistant material to ensure proper functionality in extreme conditions. The insulation on the wire is specially formulated to protect against wear and tear, providing superior protection against damage from environmental factors like moisture, heat, and friction.

The MTC 3675 brake pad wear sensor wire uses a clever design to detect when brake pads have worn down to a certain level. It achieves this by measuring the resistance in the circuit created when the pad wears down and comes into contact with the brake rotor. Once the resistance drops to a specific level, the system sends a warning signal to the vehicle's dashboard, alerting the driver that it's time to replace the worn out brake pads.

Installing the MTC 3675 brake pad wear sensor wire is a straightforward process. The wire connects to the brake caliper or the ABS control module using simple plug-and-play connections. This makes it easy for DIY enthusiasts to install the wire themselves, while professional technicians can swiftly and efficiently replace the sensor during routine maintenance or repairs.

The MTC 3675 brake pad wear sensor wire offers numerous benefits to vehicle owners. By providing advanced warning when brake pads reach a specific level of wear, it helps drivers stay safe and avoid potential accidents that could result from worn-out brake pads. Additionally, it allows for a more proactive approach to vehicle maintenance, reducing the need for costly repairs and potential downtime.

In conclusion, the MTC 3675 brake pad wear sensor wire is a vital component for maintaining the safety and performance of a vehicle. Its high-quality design, ease of installation, and advanced warning features make it an indispensable tool for both professional technicians and DIY enthusiasts.Whether you're getting ready for a long road trip or simply ensuring your daily driver is in top condition, the MTC 3675 brake pad wear sensor wire is an essential addition to your vehicle maintenance arsenal.

Buying an MTC 3675 brake pad wear sensor wire involves considering both its advantages and disadvantages before making a decision. Here's a brief analysis:

1. Safety: A brake pad wear sensor is an essential safety component in vehicles. It activates the warning light on the dashboard when brake pads reach a minimum thickness, indicating the need for replacement. Replacing a worn-out sensor with a new one ensures that the warning system functions correctly.

2. Cost-effective: Opting for an MTC 3675 brake pad wear sensor wire is a cost-effective solution for replacing the faulty sensor rather than buying a new brake pad assembly or having your entire brake system checked when only the sensor is malfunctioning.

3. Convenience: The OEM part offers a direct fit for MTC 3675 models, ensuring easy and hassle-free installation. This reduces the time and effort required to replace the sensor, as you won't need to troubleshoot other potential issues with the brake system.

1. Cost: Although buying the sensor wire is more cost-effective than replacing the entire brake pad assembly, the cost of the MTC 3675 sensor wire can still add up, especially if it's an unplanned expense. Consider checking if other sensors or components in the brake system need replacement before deciding to buy a new sensor wire.

2. Availability: Depending on your location and the availability of the specific MTC 3675 sensor wire for your vehicle, you might face a wait for the part to be shipped or sourced from another vendor.

In conclusion, investing in an MTC 3675 brake pad wear sensor wire offers safety and cost-effectiveness benefits. However, potential drawbacks such as cost and availability should be considered before making a purchase. If you are confident that only the sensor requires replacement, and it is readily available, then the benefits outweigh the disadvantages. If you experience any hesitation regarding the need for a new sensor or have doubts about the fitment, it might be wise to consult a professional mechanic for advice.

My recommendation would be to ensure that the sensor is indeed the culprit before purchasing the MTC 3675 brake pad wear sensor wire. Double-check the symptoms and consult a trusted mechanic or the vehicle's owner's manual to confirm the need for replacement. Once you've confirmed that the sensor is at fault, searching for a reputable spare parts provider and securing the part before experiencing an unexpected issue will save you time, effort, and potential safety risks.

part # 3675 prices

• $18.80-$36.99

specifications wearwonka:

• brand: Mtc
• placement on vehicle: Wheels
• manufacturer part number: 3675
• interchange part number: 084-1528 WS379 PWS179
• warranty: 1 Year
• type: Brake Pad Wear Sensor
• features: Direct Fit
• caution: Fitment Is For North America Vehicles
• position: Front
• country of origin: Primary
• terminal quantity: Factory Quantity
• terminal type: Factory Connector
• material: Factory Specifications
• fitment type: Direct Replacement
• modified item: No
• oe/oem part number: 210-540-11-17

payments wearwonka:

• wallet: Google-pay
• other
• credit card: Visa

returns wearwonka:

• paid by: Buyer
• time: 30 Days
• policy: Returns Accepted

general wearwonka:

• condition: New
• Car Truck Parts Accessories > Brakes Brake Parts > Brake Pad Wear Sensors

shipping wearwonka:

• type: Fixed
• cost: $0.00
• service: Economy
• transit: 3-9 Days
• class: Economy

offer wearwonka:

• started: November 6, 2024
• quantity: 5
• availability: In Stock
• sold: 0
• options: Ship-to-home

seller wearwonka:

• rating: 99.2%
• # reviews: 11869

Mtc 3675 Is Similar To:

• Mtc 1276 Brake Pad Wear Sensor With Factory Quantity Wire Direct Fit (95.6% similar) $22.72–$58.15. (August 29th, 2024)
• Mtc 122038 Brake Pad Wear Sensor With Factory Quantity Wire Direct Fit (94.2% similar) $28.99–$43.99. (August 29th, 2024)
• Mtc 4549 Brake Pad Wear Sensor With Factory Quantity Wire Direct Fit (95.6% similar) $20.80–$36.99. (October 25th, 2024)
• Mtc 7896 Brake Pad Wear Sensor With Factory Quantity Wire Direct Fit (95.6% similar) $24.53–$40.99. (October 26th, 2024)
• Mtc 1777 Brake Pad Wear Sensor With Factory Quantity Wire Direct Fit (95.6% similar) $28.87–$252.87. (October 26th, 2024)
• Mtc 1773 Brake Pad Wear Sensor With Factory Quantity Wire Direct Fit (95.6% similar) $26.48. (October 26th, 2024)
• Mtc 1010123 Brake Pad Wear Sensor With 2 Wire Direct Fit (79% similar) $29.34–$46.99. (October 26th, 2024)
• Mtc 3357 Brake Pad Wear Sensor With Factory Quantity Wire Direct Fit (97.1% similar) $24.69–$35.99. (October 31st, 2024)
• Mtc 122037 Brake Pad Wear Sensor With Factory Quantity Wire Direct Fit (95.7% similar) $27.67–$32.33. (October 31st, 2024)
• Mtc 1010120 Brake Pad Wear Sensor With 2 Wire Direct Fit (77.4% similar) $31.89–$43.99. (October 31st, 2024)
• Mtc 144059 Brake Pad Wear Sensor With Factory Quantity Wire Direct Fit (94.2% similar) $36.99. (November 6th, 2024)